Engineering, 23.04.2021 17:50 leeannjones1
Tainter gates are often used to control the flow of water through spillways. As seen in these figures, they can be rotated to allow varying amounts of water through the spillway. Let us model the illustrated spillway wherein the spillway half width 190 cm, Tainter gate radius 180 cm, water height (above the bottom of the Tainter gate) 160 cm. Determine the weight in N of the water over the half gate. N Determine the ground reaction force in N acting on the Tainter gate at the pivot point due to the water pressure. (Hint: What direction is the pressure force acting
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
Tainter gates are often used to control the flow of water through spillways. As seen in these figure...
Questions
English, 14.10.2019 17:30
