If the lever in the picture below has a force advantage of 1, then... Select one:
a. the effort force must be the same as lifting force.
b. the effort force must be less than lifting force.
c. the effort force must be greater than lifting force.
d. any of the above could be true.

Aball bearing at 220.0 °c is dropped into a cup containing 250.0 g of water at 20.0 °c. the water and ball bearing come to a temperature of 30.0 °c. what is the heat capacity of the ball bearing in j/°c? (hint: how are the algebraic signs of q related for the ball bearing and the water? )

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

What are similarities and differences of reflection, refraction, diffraction and absorption?