When the 200 g mass is placed on the pressure toadstool, the student measures how far the thin plastic block sinks into the sand and finds the depth to be 22 mm.
Describe how the student could use a thin wooden rod, a pencil and a 30 cm ruler to find an accurate value for
the depth​

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

The speed of light in a material is 0.50 c. what is the critical angle of a light ray at the interface between the material and a vacuum?

It's a snowy day and you're pulling a friend along a level road on a sled. you've both been taking physics, so she asks what you think the coefficient of friction between the sled and the snow is. you've been walking at a steady 1.5m/s, and the rope pulls up on the sled at a 32 ∘ angle. you estimate that the mass of the sled, with your friend on it, is 65 kg and that you're pulling with a force of 80 n .