какое количество теплоты нужно передать льду массой 100г , при температуре -0 градусов чтобы расплавить

Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material b. the machinist heats both the pin and the block to the same high temperature and removes the pin easily. what statement relates the coefficient of thermal expansion of material a to that of material b? a) the situation is not possible, heating block b will shrink the hole in the material as the material expands with increasing temperatureb) material b has the same coefficient of expansion as does material ac) material b has a negative coefficient of expansion and a has a positive coefficient of expansiond) material a has a greater coefficient of expansion than does material be) material b has a greate

Aforce of 240.0 n causes an object to accelerate at 3.2 m/s2. what is the mass of the object?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)