A second rock is thrown straight upward with a speed 4.750 m/s . If this rock takes 2.006 s to fall to the ground, from what height H was it released?

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

In the nineteenth century, gregor mendel first determined some basic rules of genetics that have been observed throughout all types of life. no observations have disproved these basic rules of genetics. charles darwin developed the idea of biological evolution around the same time, but he was unaware of mendel’s discoveries in genetics. over a century later, darwin’s idea of evolution was modified in order to incorporate mendel’s rules of genetics along with the other evidence that darwin had used. what is most likely the relationship between mendel’s rules of genetics and darwin’s idea of biological evolution? a.)mendel’s genetics states laws that are now part of the theory of biological evolution.b.)biological evolution states laws that are part of mendel’s theory of genetics.c.)mendel’s genetics replaced darwin’s entire concept of biological evolution.d.)biological evolution is a law that explains why all genetics exist.

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.