Engineering, 28.05.2021 17:10 edjiejwi

Help A 1D signal of up to 20,000 samples is considered.
Using data structures specific to simple chained lists, determine the number of zero passes of the signal. The signal goes through 0 if it changes its sign from one sample to another. 0 is not considered a sign change.
The use of STL is prohibited. Any data structure in the STL or function in the STL used will lead to a 0-point solution.
The use of vectors is prohibited. Any static (T V [N]) or dynamic (T * V = new T [N]) vector structure used will lead to the 0 score of the solution.
Input data:
N number of samples signal samples
Output data:
the number of passes through zero
Example:
Input data:
10
1 3 -2 -6 4 10 1 -5 4 1 Output data:
4
Explanation:
There are 4 sign changes between two consecutive samples:
3 -2 -> sign change (first zero crossing)
-6 4 -> sign change (second zero crossing)
1 -5 -> sign change (third zero crossing)
-5 4 -> sign change (fourth zero crossing)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

Answer

You know the right answer?

Help A 1D signal of up to 20,000 samples is considered.
Using data structures specific to sim...

Questions