subject
Engineering, 21.05.2021 01:00 tommyaberman

Interior designer Krista receives a job to completely renovate the interiors of a series of shop spaces in a building that has just changed ownership. Krista notices some troubling issues with the arrangement of the HVAC system, but she ignores those and concentrates on the interior design
because she is on a tight schedule and budget. She decides to focus mainly on cosmetic issues and doesn't bother with moving or taking down
walls or other deeper changes. A space that was fitted out as a salon stays a salon, and a space fitted out with dressing rooms and mirrors as a
retail clothing shop keeps its dressing rooms and mirrors. If the client has problems with Krista's work, what are the likely contributing factors?
(Select all that apply.)
Krista sees problems with the HVAC system and yet chooses to ignore these issues instead of informing the client and trying to fix them
Krista only appears to be concerned with keeping within her allotted schedule and budget and not going beyond that
Krista didn't bother to address the function of each shop space to make each one more versatile and useful for a variety of occupants
Krista basically just does what an interior decorator would do in this situation without addressing deeper design issues

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
You know the right answer?
Interior designer Krista receives a job to completely renovate the interiors of a series of shop spa...
Questions
question
Social Studies, 03.12.2021 21:30
Questions on the website: 13722362