Autos!! please help
A driver complains that the brake pedal slowly
moves toward the floor whe...
Engineering, 19.05.2021 22:10 cyaransteenberg
Autos!! please help
A driver complains that the brake pedal slowly
moves toward the floor when the vehicle is stopped
at traffic lights. Pumping the pedal temporarily re-
turns the pedal to the proper height. Also, the brake
fluid has been checked and is at a normal height in
the reservoir. Technician A says that a bad master
cylinder could be the cause of the problem. Fluid
could be leaking internally in the cylinder. Techni-
cian B says that a leaking
wheel cylinder could be
allowing pressure to drop. Who is correct?
A only
B only
Both A and B
Neither A nor B
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Questions
Physics, 16.10.2019 17:30
Biology, 16.10.2019 17:30
Mathematics, 16.10.2019 17:30
Computers and Technology, 16.10.2019 17:30
Law, 16.10.2019 17:30
Social Studies, 16.10.2019 17:30
English, 16.10.2019 17:30
History, 16.10.2019 17:30
