subject
Engineering, 05.04.2021 14:00 trent1002brown

The oblique reservoir manometer shown in the figure consists of a 35 mm diameter vertical reservoir cylinder and a 5 mm diameter tube inclined at an upward angle of 15 °. If the vertical reservoir cylinder is inclined to the atmosphere, the tube opens to the air channel. The manometer is filled with liquid with a specific gravity of 0.785. What will be the pressure in the air duct if the manometer liquid in the inclined tube rises 50 mm upwards?


The oblique reservoir manometer shown in the figure consists of a 35 mm diameter vertical reservoir

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
question
Engineering, 06.07.2019 03:20
An air-conditioning system consists of a heating section and an evaporative cooler. air enters the heating section at 10°c and 70 percent relative humidity at a rate of 30m^3/min, and it leaves the evaporative cooler at 20°c and 60 percent relatively humidity. if the air conditioning system operates at a total pressure of 98 kpa, determine (a) the temperature and relative humidity of the air when it leaves the heating section, (b) the rate of heat transfer in the heating section, and (c) the rate of water added to air in the evaporative cooler
Answers: 2
You know the right answer?
The oblique reservoir manometer shown in the figure consists of a 35 mm diameter vertical reservoir...
Questions
Questions on the website: 13722360