subject
Engineering, 09.02.2021 16:10 hannahmyung1113

In a full duplex communication by using UTP cable, Pt =140 w, Pr =10 w and NEXTdb =14,47. According to this information which answer is correct? a.
Pc = 7,50 Adb = 12,97 ACRdb = 1,51

b.
Pc = 5,00 Adb = 11,46 ACRdb = 3,01

c.
Pc = 7,50 Adb = 14,47 ACRdb = 0,00

d.
Pc = 10,00 Adb = 12,97 ACRdb = 1,51

e.
Pc = 10,42 Adb = 9,97 ACRdb = 4,50

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
You know the right answer?
In a full duplex communication by using UTP cable, Pt =140 w, Pr =10 w and NEXTdb =14,47. According...
Questions
question
Mathematics, 05.05.2020 22:14
question
Chemistry, 05.05.2020 22:14
question
Mathematics, 05.05.2020 22:14
question
French, 05.05.2020 22:14
question
Mathematics, 05.05.2020 22:14
Questions on the website: 13722363