Engineering, 24.09.2020 15:01 luv4appleallday

The use of seat belts in cars has significantly reduced the number of crash fatalities. Which statement best explains how the market forces of supply and demand guided the development of seat-belt technology? A. When a large enough supply of seat-belt parts became available, the public demand for their use in cars increased.B. Consumers' desire for more comfortable seat belts led engineers to improve seat belts.C. Engineers recognized the dangers of not wearing a seat belt and decided to develop systems that would be affordable to manufacture.D. As car manufacturers developed seat-belt technology, they began to advertise seat belts' ability to prevent injuries and death to consumers.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?

Answers: 2

Answer

You know the right answer?

The use of seat belts in cars has significantly reduced the number of crash fatalities. Which statem...

Questions