subject
Engineering, 16.04.2020 01:10 Dulcecandyy9396

Now, suppose that you have a balanced stereo signal in which the left and right channels have the same voltage amplitude, 500 mVpp. This time, however, you want to be able to mix these two channels into a single inverted output while independently varying the gain of the two channels. Design and build an op amp circuit with potentiometers so that you can independently vary the gain of the left and right channels. Choose resistors so that the overall output of your circuit ranges between 0.1Vpp (when both channels are set to minimum gain) and 20Vpp (when both channels are set to maximum gain).

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate Ă t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
question
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Now, suppose that you have a balanced stereo signal in which the left and right channels have the sa...
Questions
Questions on the website: 13722363