How many sets of equations (V and M equations) would you need to describe shear and moment as functions of x for this beam? In other words, how my segments of the beam need to be analysed separately? There is a uniform distributed load (w )on the left and a concentrated force P applied to the beam

Shear and moment as functions of x is described below .

Explanation:

1. Beam is the slender bar that carries transverse

loading; that is, the applied force are perpendicular to the bar.

2. In a beam, the internal force system consist of a shear force and

a bending moment acting on the cross section of the bar.

3. The  shear force and the bending moment usually vary continuously

along the length of the beam.

4. The internal forces give rise to two kinds of stresses on a

transverse section of a beam:

(1) normal stress that is caused by

bending moment and

(2) shear stress due to the shear force.

Knowing the distribution of the shear force and the bending

moment in a beam is essential for the computation of stresses

and deformations.

Shear- Moment Equations

The determination of the internal force system acting at a given

section of a beam : draw a free-body diagram that expose these

forces and then compute the forces using equilibrium equations.

The goal of the beam analysis －determine the shear force  V and  the bending moment  M at every cross section of the beam.

To derive the expressions for  V and M in terms of the distance x

measured along the beam. By plotting these expressions to scale,

obtain the shear force and bending moment diagrams for the

beam.

The shear force and bending moment diagrams are convenient

visual references to the internal forces in a beam; in particular,  they identify the maximum values of  V and  M

answer:

dsfdssdfdssfdsfd

explanation:

u mhm

i would have to say I like 12 in a pp but in a foot I would be a  HAPPY BRAINING AHHAJAHAHAHAHAHAHAH I like frick

Explanation:

Nina is the best breianlist perIOT.