Engineering, 02.03.2020 17:17 michaelsmith710
Results of a standard compaction test (mold volume 943.9 cm3 ) are: Trial No. 1 Mass of soil + mold 5619 g Mass of mold 3735 g Water content test Mass of sample + container 288.26 g Mass of dry sample + container 265.39 g Mass of container 104.31 g Trial No. 2 Dry density 1795 kg/m3 w=14.9% Trial No. 3 Dry density 1828 kg/m3 w=15.6% Trial No. 4 Dry density 1832 kg/m3 w=16.5% Trial No. 5 Dry density 1796 kg/m3 w=17.6% Complete the calculations for trial No. 1. Draw the moisture-density curve using Excel or other spreadsheet programs. Include ZAV curves at w=16%, 17%, and 18%. (The relative density of the soil is 2.65.) Find the maximum dry density and the optimum water content.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
You know the right answer?
Results of a standard compaction test (mold volume 943.9 cm3 ) are: Trial No. 1 Mass of soil + mold...
Questions
