Engineering, 12.02.2020 01:53 kallie862
A 7-ft tall steel cylinder has a cross-sectional area of 15 ft2. At the bottom, with a height of 2 ft, is liquid water, on top of which is a 4-ft-high layer of engine oil, see Fig P1.43. The engine oil surface is exposed to atmospheric air at 14.7 psia. What is the highest pressure in the water?
Answers: 3
![P=14.7 +[(62.2*2) +(52.66*4) ]\frac{32.174}{144*32.174}\\P=14.7 +[(62.2*2) +(52.66*4) *0.0069 \\P=17.01 lbf/in^{2}](/tpl/images/0507/7419/161ae.png)
Another question on Engineering
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate à t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
A 7-ft tall steel cylinder has a cross-sectional area of 15 ft2. At the bottom, with a height of 2 f...
Questions
Mathematics, 11.06.2020 01:57
Mathematics, 11.06.2020 01:57
Mathematics, 11.06.2020 01:57
Mathematics, 11.06.2020 01:57
History, 11.06.2020 01:57
