subject
Engineering, 12.12.2019 01:31 nestergurl101

create a first draft of a wbs from the following scenario. make assumptions as needed based on the section about project planning considerations and constraints in this chapter. in your wbs, describe the skill sets required for the tasks you have planned.

sequential label and supply has a problem with employees surfing the web to access material the company deems inappropriate for a professional environment. therefore, sls wants to insert a filtering device in the company internet connection that blocks certain web locations and content. according to the vendor, the filter is a hardware appliance that costs $18,000 and requires 150 hours to install and configure. technical support for the filter costs 18 percent of the purchase price and includes a training allowance for the year. a software component that runs on the administrator’s desktop computer is needed to administer the filter; this component costs $550. a monthly subscription provides the list of sites to be blocked and costs $250 per month. an estimated four hours per week are required for administrative functions.

you should consider the following items:

• your plan requires two parts: one for deployment and another for ongoing operation after implementation.

• the vendor offers a contracting service for installation at $140 per hour.

• your change control process requires a 17-day lead time for change requests.

• the manufacturer has a 14-day order time and a seven-day delivery time for this device.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
create a first draft of a wbs from the following scenario. make assumptions as needed based on the s...
Questions
question
Chemistry, 22.02.2021 04:20
question
Mathematics, 22.02.2021 04:20
question
Mathematics, 22.02.2021 04:20
Questions on the website: 13722360