Engineering, 04.12.2019 02:31 sibr4566

Vehicle suspension (60 pts) solve for a vehicle's eom if the car has a front and rear suspension system. note that this is a two-degree of freedom problem. model the free response of the system using two degrees of freedom.

a) state given/found/assumed information. you must cite references of where you obtain information. (15 pts)
b) draw your mechanical system. (10 pts)
c) draw the fbd with the minimum dimensions and variables defined that are needed to model the system. (10 pts)
d) draw the id with the minimum dimensions and variables defined that are needed to model the system. (10 pts)
e) solve for the 2nd ode that describes the mechanical system. (15 pts)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:10

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Acompressor compresses a gas, a pump compresses a liquid. for a given pressure ratio, why does it take more work to compress a gas in a compressor than a liquid in a pump? a)- for a given pressure ratio the average specific volume for a gas is much higher than the average specific volume for a liquid. b)- there is no difference. the only difference is the amount of heat generated (not work) c)- for a given pressure ratio the average volurge for a gas is much higher than the average volume for a liquid. d)-there is no difference

Answers: 3

Answer

You know the right answer?

Vehicle suspension (60 pts) solve for a vehicle's eom if the car has a front and rear suspension sys...

Questions