Engineering, 11.11.2019 23:31 haleymoodie1998
In a heat treatment process, a 2-kg steel part that is initially at 1000 k, is quenched in a tank containing oil, initially at 300 k. there is negligible heat transfer between the contents of the tank and their surroundings. the steel part = 0.50 kj (kgk), = 8080 kg m3 ⁄ ⁄ ] and oil [cc = 1.95 kj (kgk), = 890 kg m3 ⁄ ⁄ ] can be modeled as incompressible substances
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
In a heat treatment process, a 2-kg steel part that is initially at 1000 k, is quenched in a tank co...
Questions
Mathematics, 13.12.2019 17:31
Computers and Technology, 13.12.2019 17:31
