Two cylinders with the same mass density rc = 713 kg / m3 are floating in a container of water (with mass density rw = 1025 kg / m3). cylinder #1 has a length of l1 = 20 cm and radius r1 = 5 cm. cylinder #2 has a length of l2 = 10 cm and radius r2 = 10 cm. if h1 and h2 are the heights that these cylinders stick out above the water.

what is the ratio of the height of cylinder #2 above the water to the height of cylinder #1 above the water (h2 / h1)?

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

Atrain departs from its station at a constant acceleration of 5 m/s. what is the speed of the train at the end of 20s?

Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?