Task 1-
give illustrations and or descriptions of how the following forces would appear in st...
Engineering, 13.10.2019 04:20 jack487
Task 1-
give illustrations and or descriptions of how the following forces would appear in structure under load.
•shear
•tension
•compression
•stress
•strain
task 2
predict the simple structural behaviour of the following -show using drawings:
•a steel portal frame overloaded at the bolted junction with the column •an overloaded and undersized concrete lintel spanning a window opening
•a strip foundation designed to take a load of 30 n/mm2, which is actually subjected to a load of 50 n/mm 2
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
History, 04.04.2020 13:59
Mathematics, 04.04.2020 13:59
Mathematics, 04.04.2020 13:59
Computers and Technology, 04.04.2020 14:00
Chemistry, 04.04.2020 14:01