Engineering, 05.10.2019 13:00 Badbpyz7550
In what scenario(s) would a local tolerance be preferred over a global declaration?
Answers: 2
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
In what scenario(s) would a local tolerance be preferred over a global declaration?...
Mathematics, 20.12.2021 07:20
Mathematics, 20.12.2021 07:30
Mathematics, 20.12.2021 07:30
Mathematics, 20.12.2021 07:30
Mathematics, 20.12.2021 07:30
Mathematics, 20.12.2021 07:30
Business, 20.12.2021 07:30
English, 20.12.2021 07:30
Mathematics, 20.12.2021 07:30