Engineering, 14.09.2019 05:30 Swayk8505
If the original length of a specimen is l0 = 10"" and new length of the specimen after applied load is l = 12.5"". the value of true strain is: a) 0.5 b) 0.25 c) 0.223 d) 0.4
Answers: 2
is the strain
is the original length of specimen
is the elongated length of specimen
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
You know the right answer?
If the original length of a specimen is l0 = 10"" and new length of the specimen after applied load...
Questions
Chemistry, 05.05.2020 06:06
Mathematics, 05.05.2020 06:06
Mathematics, 05.05.2020 06:06
History, 05.05.2020 06:06
English, 05.05.2020 06:06
