Computers and Technology, 20.07.2020 06:01 brooke012002

Draw a flowchart to accept two numbers, and then output the result as the first number the power of the second number
Input 4 and 3
4×4×4
output is 64

Answers: 3

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 09:30

Is a string of code written to hurt others by damaging or destroying

Answers: 1

Answer

Computers and Technology, 23.06.2019 22:30

Apart from confidential information, what other information does nda to outline? ndas not only outline confidential information, but they also enable you to outline .

Answers: 1

Answer

Computers and Technology, 24.06.2019 10:10

Scanning the road can be thought of as a

Answers: 2

Answer

Computers and Technology, 24.06.2019 18:00

Why is a multiview sketch drawinf different from other sketches like isometric, two point, and oblique

Answers: 1

Answer

You know the right answer?

Draw a flowchart to accept two numbers, and then output the result as the first number the power of...

Questions

Engineering, 26.07.2019 20:20

Arotating machine of mass 100 kg sits on an elastic foundation comprised of a spring and a damper. the spring stiffness is 100 kn/m and the damping ra...

Engineering, 26.07.2019 20:20

What are the general steps for designing a gear mesh?...

Engineering, 26.07.2019 20:20

Acan of soda is initially at a uniform temperature of 3°c. the aluminum can is 12.5-cm high and has a diameter of 6 cm. the thickness of the can wall...

Engineering, 26.07.2019 20:20

Steam at 40 bars and 280 c is cooled in a constant volume container to state of 9 bars. the heat removed from the steam enters into environment at 15...

Engineering, 26.07.2019 20:20

Arotating machine of mass m 100 kg is supported on four elastic mounts with a total stiffness of k 200, 000 n/m and damping constant of c 500 ns/m. th...

Engineering, 26.07.2019 20:20

When do you want to use shell feature? a)-make a 2d sketch of a gear b)-make a 3d model of a gear box c) make a 2d shell of a shaft (d) make a 3d mat...

Engineering, 26.07.2019 20:20

Explain control system terminology with block diagram?...

Engineering, 26.07.2019 20:20

What is the deflection of a w12x30 16 ft long with a distributed load of 2k/ft? include the weight of the beam. a) 0.027in b) 0.055in c) 0.434in d) 0...

Engineering, 26.07.2019 20:20

What are the selection criteria for pump and motor? justify your points....

Engineering, 26.07.2019 20:20

Heat is generated uniformly at a rate of 2 × 105 w/m^3 in a wall of thermal conductivity 25 w/m · k and thickness 60 mm. the wall is exposed to convec...

Engineering, 26.07.2019 20:20

Why does wood design have adjustment factors but steel design does not? a)- the wood council chose to be more specific concerning design as opposed t...

Engineering, 26.07.2019 20:20

Aspherical tank of radius 1 m containing radioactive material is buried in the earth. the distance between the earth's surface and the tank center is...

Engineering, 26.07.2019 20:20

What is the maximal coefficient of performance of a refrigerator which cools down 10 kg of water (and then ice) to -6c. upper heat source of this refr...

Engineering, 26.07.2019 20:20

Define transfer function and find the transfer function of a closed loop control system?...

Engineering, 26.07.2019 20:20

Ahollow sphere is constructed of pure aluminum with an inner diameter of 4 cm and an outer diameter of 8 cm. the sphere is covered with a 1-cm layer o...

Engineering, 26.07.2019 20:20

Ascalar can only be a positive quantity that has a magnitude but no direction ? a)-true b)-false...

Engineering, 26.07.2019 20:20

Asmall ideal two-stroke, single cylinder model otto engine has a compression ratio of 5: 1. the intake air is at 14.7 psi and 80°f. the cylinder has a...

Engineering, 26.07.2019 20:20

An asset for drilling was purchased and placed in service by a petroleum production company. its cost basis is $60,000, and it has an estimated market...

Engineering, 26.07.2019 20:20

Differentiate between open loop and closed loop system with examples?...

Chemistry, 26.07.2019 20:20

A) which are the things you should take care of before, while and after running your analyses? b) what do you need control reactions for? what do yo...

More questions: Computers and Technology Another questions

Draw a flowchart to accept two numbers, and then output the result as the first number the power of the second numberInput 4 and 34×4×4 output is 64

Answers

Another question on Computers and Technology

Draw a flowchart to accept two numbers, and then output the result as the first number the power of the second number
Input 4 and 3
4×4×4
output is 64