subject
Engineering, 26.07.2019 20:20 yvettegonzalez3390yg

Acan of soda is initially at a uniform temperature of 3°c. the aluminum can is 12.5-cm high and has a diameter of 6 cm. the thickness of the can wall is 0.11 mm. the combined convective and radiative heat transfer coefficient between the can and the surrounding air of 25°c is 10 w/m2 · k. (a) determine the overall heat transfer coefficient, assuming the heat transfer from the bottom of the can is negligible. (b) estimate how long it will take for the average temperature of the soda to rise to 10°c, assuming the heat transfer rate is constant at its initial value. (c) in order to slow the warming of the soda, the soda is placed in a 1-cm thick cylindrical koozie (k = 0.13 w/m · k). estimate how long it will now take for the average temperature to rise to 10°c, recognizing that the top of the can is not covered.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
Acan of soda is initially at a uniform temperature of 3°c. the aluminum can is 12.5-cm high and has...
Questions
question
Mathematics, 31.08.2019 11:30
Questions on the website: 13722367