For the MIPS assembly instructions below, what is thecorresponding C statement? Assume that the variables f, g, h, i, and j are assignedto registers $s0, $s1, $s2, $s3, and $s4, respectively. Assume that the base addressof the arrays A and B are in registers $s6 and $s7, respectively.
sll $t0, $s0, 2 # $t0 = f * 4
add $t0, $s6, $t0 # $t0 = &A[f]
sll $t1, $s1, 2 # $t1 = g * 4
add $t1, $s7, $t1 # $t1 = &B[g]
lw $s0, 0($t0) # f = A[f]
addi $t2, $t0, 4
lw $t0, 0($t2)
add $t0, $t0, $s0
sw $t0, 0($t1)

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo.i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

Experimental data that is expressed using numbers is said to be

Which of the following tasks is an audio technician most likely to perform while working on a nature documentary? (select all that apply). eliminating potentially distracting background noise adding sound effects making sure the lighting is adequate for a particular scene changing the narration to better match the mood of the documentary