Physics, 02.08.2019 12:30 ANCHUXIA

Determine the final state and temperature of 100 g of water originally at 25.0°c after 50.0 kj of heat have been added to it.

Answers: 1

Show answers

Answers

The quantity of heat needed to increase the temperature of a substance by $\Delta T$ is given by
$Q=m C_p \Delta T$
where m is the mass of the substance and C_p

is the specific heat of the substance. In our problem, we have m=100~g=0.1~Kg

and

, which is the speficic heat of the water.
Therefore, we can find the increase in temperature $\Delta T$ :
$\Delta T = \frac{Q}{m C_p}= \frac{50~KJ}{0.1~Kg cdot 4.19~KJ/(Kg K)}=119~K =119^{\circ}C$
The initial temperature of the water was $25^{\circ}C$ , so the final temperature should be
$T_f = 25^{\circ}C+119^{\circ}C=144^{\circ}C$
So the water should be now vapor.

To be more precise, however, in the transition liquid-vapor part of the heat added to the system is used to break the bonds between molecules, and it does not increase the temperature of the system. The amount of heat needed for the transition between liquid and vapor is given by
$Q=m C_L=0.1~Kg \cdot 2265~KJ/Kg=226.5~KJ$
where C_L

is the latent heat of vaporization of the water.
However, the initial amount of heat added to the water (50 KJ) is smaller than this number, therefore there isn't enough heat to complete the transition liquid-vapor. Therefore, the water will still be in the liquid-vapor change phase at a temperature of $100^{\circ}C$ (which is the temperature at which the phase change starts)

Answer from: hermine40

The final state of the water is vapor (gas) and the final temperature is 144.1 ⁰C.

The given parameters;

Mass of the water, m = 100 gInitial temperature of the water, t₁ = 25 °CHeat added to the water, Q = 50 kJ = 50,000 J

The quantity of the heat added to water to cause a change in the state of the water is given as;

Q = mcΔt

where;

c is the specific heat capacity of water = 4,200 J/kg°CΔt is the change in temperature of the water

The change in temperature of the water is calculated as;

$\Delta t = \frac{Q}{mc} \\\\\Delta t = \frac{50,000}{0.1 \times 4,200} \\\\\Delta t =119.1 \ ^0C$

The final temperature of the water is calculated as;

Δt = t₂ - t₁

t₂ = Δt + t₁

t₂ = 119.1 + 25

t₂ = 144.1 ⁰C.

Thus, the final state of the water is vapor (gas) and the final temperature is 144.1 ⁰C.

Learn more here:link

Answer from: Quest

Does this your question?

Answer from: Quest

radial fractures in a piece of glass look most like which of the following?

a. spokes of a wheel

b. a circle

c. a zig zag

d. none of the above

the correct answer is a. spokes of a wheel

hope this (:

Another question on Physics

Physics, 22.06.2019 07:50

Imagine you are standing in the antarctic during the southern hemisphere summer. the sky is clear and blue. there are no clouds in the sky. your shadow is cast on the icy ground. what is the color of the shadow?

Answers: 1

Answer

Physics, 22.06.2019 13:00

The magnitude of the amount of energy released by burning a fuel source, measured in energy per unit mass, is called its fuel value. note that the fuel value is the negative of the isobaric specific heat of combustion for the fuel. if all the energy obtained from burning 1.23 pounds of butane with a fuel value of 10.85 kcal/g is used to heat 128.0 kg of water at an initial temperature of 18.3 °c, what is the final temperature? note that 1 lb = 453.6 g.

Answers: 3

Answer

Physics, 22.06.2019 16:00

What is the measure of how much matter is in an object and that can be measured using a balance? a. height b. volume c. weight d. mass

Answers: 1

Answer

Physics, 23.06.2019 08:50

The place where two plates come together is known as a a. transform boundary. b. divergent boundary. c. convergent boundary. d. rift valley.

Answers: 1

Answer

You know the right answer?

Determine the final state and temperature of 100 g of water originally at 25.0°c after 50.0 kj of he...