Physics, 04.08.2019 02:30 DiegoMath

Atank containing liquid butane and one containing liquid propane are sitting adjacent to one another. each tank is equipped with a regulator with a pressure gauge. classify these statements as true or false.

Answers: 1

Show answers

Answers

The pressure reading for the butane tank is higher than that for the propane tank is False.
The pressure readings will change when more liquid is added to the tanks is False.
If the tanks are placed outside and the sun warms each tank to 46 , the pressure readings will be higher than they were initially is True
If an equal number of moles of gas is allowed to escape rapidly from each tank, the temperature of the butane tank will be lower than that of the propane tank is True.

Answer from: raven1619

Changes in pressure on the butane and propane, if it is at a fixed temperature, is wrong.

There is a change in pressure on the butane and propane if it is at a certain temperature which can make the mass of butane heavier than propane is true.

Further Explanation

The state of equilibrium in a system is stable if there is no influence from outside the system. If an effect (action) is given to equilibrium, the system will move towards a new equilibrium. At this new equilibrium, the composition of substances involved in equilibrium changes from the original composition.

The following factors can cause a shift in equilibrium, namely:

Concentration, if the concentration of the reactants is added, the equilibrium will shift towards the formation of the product Pressure, when the pressure is increased, the volume will decrease, so the equilibrium will shift to a small number of moles. Volume, when the volume is enlarged, the pressure will decrease, so the equilibrium will shift to a large number of moles. Temperature / Temperature, if the temperature is raised, the reaction will shift towards the endothermic reaction (a reaction that absorbs heat).

Butane, also called n-butane, is a straight-chain alkane with four CH3CH2CH2CH3 carbon atoms. Butane is also used as a collective term for n-butane and its only isomer, isobutane (also called methylpropane), CH (CH3) 3. Butane is very flammable, colorless, and is a liquefied gas. The name butane is derived from the name butyric acid.

Propane is a three-carbon alkane compound with the chemical formula C3H8 in the form of gas under normal conditions but can be compressed into a liquid that is easily moved in inexpensive containers. This compound is derived from other petroleum products in the processing of petroleum or natural gas. Propane is generally used as fuel for machines, barbecues, and at home. Propane is sold as fuel, propane is also known as liquefied petroleum gas (LPG) which can be a mixture with a small amount of propane, butane, and butene. Sometimes ethanethiol is also added as an odorizing agent so that it can be used as a detection if a leak occurs. In North America, the main composition of LPG is propane (at least 90%), with the addition of butane and propane. This is the HD5 standard, which was originally made primarily for vehicle fuel.

Learn more

definition of The state of equilibrium

definition of Butane and Propane

Details

Grade: College

Subject: Physics

keywords: The state of equilibrium

Answer from: Quest

he . if i may ask what i your question exactly?

explanation:

Answer from: Quest

answer: a) y=-8x+5

a) m= -8

b) m= -2

c) m= 7

d) m= 6

Another question on Physics

Physics, 22.06.2019 04:00

If steel is more dense that lake water, why can a boat float

Answers: 1

Answer

Physics, 22.06.2019 12:50

Assume you measured the mass of the cart to be (500 ± 1) g and the mass of the additional mass you put on the cart to be (500 ± 1) g as well. since the scale you are using in the lab cannot measure objects heavier than 600g you will have to sum up individual pieces and propagate the error. so what would be the mass and the standard error of the cart and the mass

Answers: 3

Answer

Physics, 22.06.2019 16:50

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Answers: 1

Answer

Physics, 22.06.2019 17:00

The chart shows the costs and shipping times for materials that a company needs to build a new product. which describes the best trade-off if the company needs to start building their product within the next two years? they should order the domestic materials because it is always best to choose the fastest shipping time. they should order the imported materials because it is always best to choose the lowest cost for materials. since the shipping time is longer, they should order the domestic materials because the additional cost is worth it to get the materials in time. even though the shipping time is longer, they should order the imported materials because they are less expensive and should arrive in plenty of time to build the product.

Answers: 1

Answer

You know the right answer?

Atank containing liquid butane and one containing liquid propane are sitting adjacent to one another...

Questions