Priya is conducting a density experiment in which the density of a metal is calculated by the formula density = mass/volume. she tests six different metals with volumes between 15 and 32 cubic centimeters (1 cc3 = 1 ml) by first weighing each, and then dropping them into a graduated cylinder with 50.0 ml of water in it and recording the amount of water displaced by reading the new volume off the cylinder. which scenario would most likely result in the greatest percent error of the density of each metal? assume priya uses the same scale and graduated cylinder for each metal. using a graduated cylinder calibrated with 10 ml intervals using a scale with a variance of 0.0005 to weigh each metal using a graduated cylinder calibrated with 100 ml intervals using a scale that is completely balanced and accurate

According to the phase diagram for water, how is the state of water determined? proceed up a vertical line at any given temperature read the phase at the intersection of any given temperature and pressure at a given pressure, proceed horizontally to the s-l or l-g line

Na food processing facility, a spherical container of inner radius r1 5 40 cm, outer radius r2 5 41 cm, and ther- mal conductivity k 5 1.5 w/m · k is used to store hot water and to keep it at 100°c at all times. to accomplish this, the outer surface of the container is wrapped with a 800-w electric strip heater and then insulated. the temperature of the inner surface of the container is observed to be nearly 120°c at all times. as- suming 10 percent of the heat generated in the heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the container, (b) obtain a relation for the variation of temperature in the container material by solving the differential equation, and (c) evaluate the outer surface tempera- ture of the container. also determine how much water at 100°c this tank can supply steadily if the cold water enters at 20°c.

During spring semester at mit, residents of the parallel buildings of the east campus dorms battle one another with large catapults that are made with surgical hose mounted on a window frame. a balloon filled with dyed water is placed in a pouch attached to the hose, which is then stretched through the width of the room. assume that the stretching of the hose obeys hooke's law with a spring constant of 89.0 n/m. if the hose is stretched by 5.80 m and then released, how much work does the force from the hose do on the balloon in the pouch by the time the hose reaches its relaxed length? unitst 3 number-1497 the tolerance is +/-5% open show work click if you would like to show work for this question: