Auniform disk is constrained to rotate about an axis passing through its center and perpendicular to the plane of the disk. if the disk starts from rest and is then brought in contact with a spinning rubber wheel, we observe that the disk gradually begins to rotate too. if after 22 s of contact with this spinning rubber wheel, the disk has an angular velocity of 3.0 rad/s, find the average angular acceleration that the disk experiences. (assume the positive direction is in the initial direction of rotation of the disk. indicate the direction with the sign of your answer.)

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

Discuss how the hardness or softness of the landing surface is related to the time required to stop the egg

Which describes an object in projectile motion? check all that apply.a.gravity acts to pull the object downb.the object moves in a straight path.c.the forward velocity of the object is 0 m/s.d.the object’s inertia carries it forward.e.the path of the object is curved.