Aroller coaster car rapidly picks up speed as it rollsdown a slope. as it starts down the slope its speed is 4m/s. but 3 seconds later, at the bottom of the slope, its speed is 22m/s. what is its average acceleration?

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

What tightening torque should be used for a hexagonal head screw (not split-bolt) on a 250 kcmil conductor?

This is important 1. what happens to the speed of molecules in water vapor when it condenses to form a liquid? (2 points) the molecules slow down. the molecules speed up. the molecules slow down and then speed up. the molecules speed up and then slow down. 2. how might human activities change to compensate for a decrease in water supplies? (2 points) humans might build a factory. humans might build drainage systems. humans might extract more water from the ground. human behavior does not change because of the water cycle. i'll be grateful if anyone can answer these 2 questions !