Two blocks connected by a rope of negligible mass are being dragged by a horizontal force (see figure below). suppose f = 65.0 n, m1 = 14.0 kg, m2 = 26.0 kg, and the coefficient of kinetic friction between each block and the surface is 0.098 determine the acceleration of the system

Abaseball has a mass of 0.145 kg and approaches a bat at 40.0 m/s. after it is hit, the ball leaves the bat at 50.0 m/s directly back. find the impulse of the bat on the ball. 7.25 kg*m/s 13.1 kg*m/s 5.80 kg*m/s 1.45 kg*m/s

Molten iron fills a mould, which has a volume of 200 cm cubed. calculate the volume when the iron cools and solidifies. molten iron has a density of 7.0g/cm cubed. in its solid state, iron has a density of 8.0g/cm cubed.

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?