A reservoir manometer consists of a Utube in which the two arms have different diameters, as shown in Fig. 131. The diameter on the narrow side is 10.0 mm and the diameter on the reservoir side is 25.0 mm. The liquid in the manometer is oil with a density of 830 km/m-3 and the fluids in contact with the oil are gases of negligible density. The dotted line indicates the level of the oil when the pressures p1 and p2 are equal. What is the value of h when p1-p2=1000?
Answers: 2
Another question on Physics
Physics, 21.06.2019 22:30
Select the word from the list that best fits the definition classification of most stars on the h-r diagram
Answers: 1
Physics, 22.06.2019 09:40
Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?
Answers: 2
Physics, 22.06.2019 09:50
Gordon is going for a run through the park, but it is cold outside. the low outside temperature could affect his personal safety.
Answers: 1
Physics, 22.06.2019 12:00
You have a resistor and a capacitor of unknown values. first, you charge the capacitor and discharge it through the resistor. by monitoring the capacitor voltage on an oscilloscope, you see that the voltage decays to half its initial value in 2.70 miss . you then use the resistor and capacitor to make a low-pass filter. what is the crossover frequency fc?
Answers: 2
You know the right answer?
A reservoir manometer consists of a Utube in which the two arms have different diameters, as shown...
Questions
Business, 07.07.2020 07:01
Mathematics, 07.07.2020 07:01
Mathematics, 07.07.2020 07:01
Mathematics, 07.07.2020 07:01
Mathematics, 07.07.2020 07:01
