Suppose one such iceberg is 134 km long, 33.3 km wide, and 228 m thick. (a) How much heat in joules would be required to melt this iceberg (assumed to be at 0 °C) into liquid water at 0 °C? The density of ice is 917 kg/m3. (b) The annual energy consumption by the United States in 1994 was 9.3 x 1019 J. If this energy were delivered to the iceberg every year, how many years would it take before the ice melted?

A6,600 kg train car moving at +2.0 m/s bumps into and locks together with one of mass 5,400kg moving at -3.0m/s. what is their final velocity? +0.50 m/s -1.0 m/s +2.5 m/s -0.25 m/s

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

Física: un futbolista patea hacia el arco con una velocidad de 15m/ah, calcular: a)el alcance para un ángulo de tiro de 25? , b) el tiempo que el balón permanece en el aire.