Determine the work done in terms of the CR during the expansion phase. Express your answer in terms of the variables nnn, THTHT_H, CRCRCR, and gas constant RRR.

Agalvanometer has an internal resistance of 100 ω and deflects full-scale at 2.00 ma. what size resistor should be added to the galvanometer to convert it to a milliammeter capable of reading up to 4.00 ma, and how should this resistor be connected to the galvanometer?

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Who was the first scientist to measure speed as distance over time?