Physics, 30.11.2021 02:40 sehaamxoxo34

The other questions, there are just two more I need to post on here! Tysm to the people who help!

Answers: 1

Show answers

Answers

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Answer from: Quest

note: the given question is incomplete.

complete question is given below.

which is an example of kinetic energy?

a. the energy stored in ethanol

b. a hockey puck sliding across the ice

c. a compressed spring

d. a ball sitting at the top of a ramp

solution: the kinetic energy is the energy posses by the virtue of the motion of the object.

in the given options, a, c and d are the example of potential energy because it is the energy posses by the virtue of the rest of the object. but option b has the kinetic energy as the object is in motion.

hence, a hockey puck sliding across the ice is the apex example of kinetic energy.

so, the option (b) a hockey puck sliding across the ice is the correct option.

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Answer from: Quest

Cggvhb hnxukfhv. lggvkkfvf fkjfr j

Another question on Physics

Physics, 22.06.2019 15:30

What are the similarities & differences between a thermistor and a light dependent resistor in physics?

Answers: 1

Answer

Physics, 23.06.2019 01:30

Amerry-go-round of radius r, shown in the figure, is rotating at constant angular speed. the friction in its bearings is so small that it can be ignored. a sandbag of mass m is dropped onto the merry-go-round, at a position designated by r. the sandbag does not slip or roll upon contact with the merry-go-round. how would you rank the following different combinations of m and r on the basis of the angular speed of the merry-go-round after the sandbag "sticks" to the merry-go-round from largest to smallest. a) m = 10kg, r = 0.25r b) m = 20kg, r = 0.25r c) m = 10kg, r = 0.50r d) m = 10kg, r = 1.0r e) m = 15kg, r = 0.75r f) m = 40kg, r = 0.25r

Answers: 1

Answer

Physics, 23.06.2019 08:30

[05.02] what is the best explanation of the kinetic molecular theory as it relates to the energy of the molecules in the states of matter? (1 point) the molecules in a gas have greater kinetic energy than those in a liquid, which in turn have greater kinetic energy than the molecules in a solid. kinetic energy cannot be created nor destroyed, and, as a result, all states of matter have the same kinetic energy. the molecules in a gas have greater kinetic energy; therefore, they are more tightly packed than the molecules in either a liquid or a solid. the molecules in gases and liquids, in constant motion, have greater kinetic energy than those in a solid, which do not move or vibrate because their position is fixed.

Answers: 2

Answer

Physics, 23.06.2019 15:30

35 grams of salt is dissolved in 500 grams of total solution. what is the percent by mass of salt?

Answers: 1

Answer

You know the right answer?

The other questions, there are just two more I need to post on here! Tysm to the people who help!

Questions