subject
Physics, 21.09.2021 01:00 juvie65

1. Assume Earth and a cloud layer 800.0 m above the Earth can be treated as plates of a parallel-plate capacitor. a. If the cloud layer has an area of 1.00 106 m², what is the capacitance? b. If an electric field strength of 2.0 x 106 N/C causes the air to conduct charge (lightning), what charge can the cloud hold? c. Describe what must happen to its molecules for air to conduct electricity.​

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 20:40
In a vernier instrument the main scale is in 1/2 mm divisions .vernier is made by redividing 19 such divisions into 20 equal parts. calculate the least count of the instrument.
Answers: 3
question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 11:20
The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)
Answers: 3
question
Physics, 22.06.2019 18:00
What quantity do units represent in value
Answers: 1
You know the right answer?
1. Assume Earth and a cloud layer 800.0 m above the Earth can be treated as plates of a parallel-pla...
Questions
question
Mathematics, 18.09.2021 03:50
Questions on the website: 13722360