subject
Physics, 01.09.2021 03:30 addisonrausch

2.Nombra diferencias entre los conceptos mencionados. a. Ángulo de incidencia y ángulo de reflexión.
b. Un haz de luz y un rayo de luz.
c. Espejos planos y espejos esféricos.
d. Espejo cóncavo y espejo convexo.
e. Radio de curvatura y centro de curvatura.
f. Imagen real e imagen virtual

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:40
Which feature indicates that mars resides in the inner region of the solar system
Answers: 3
question
Physics, 22.06.2019 01:30
Question 7 [2 marks] in the circuit below, the electromotive force generated by the battery is e = 6.0 v, and the resistances are r1 = r4 = 1.0 q, r2 = r3 =2.0 q. r. the power delivered by the battery to the circuit is closest to a. 6 w в. 12 w с. 15 w d. 18 w e. 20 w final exam autumn 2014 page 5 of 9 68037 physical modelling faculty of science [2 mark] question 8 with reference to question 7, the current through resistor r2 is closest to a. 1 a в. 2 а c. 3 a d. 4 a e. 6 a
Answers: 2
question
Physics, 22.06.2019 03:00
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
question
Physics, 22.06.2019 23:40
To place a communications satellite into a geosynchronous orbit at an altitude of 22,240 mi above the surface of the earth, the satellite first is released from a space shuttle , which is in a circular orbit at an altitude of 185 mi, and then is propelled by an upper-stage booster to its final altitude. as the satellite passes through a, the booster's motor is fired to insert the satellite into an elliptic transfer orbit. the booster is again fired at b to insert the satellite into a geosynchronous orbit. knowing that the second firing increases the speed of the satellite by 4810ft/s, determine (a.) the speed of the satellite as it approaches b on the elliptic transfer orbit, (b.) the increase in speed resulting from the first firing at a.
Answers: 2
You know the right answer?
2.Nombra diferencias entre los conceptos mencionados. a. Ángulo de incidencia y ángulo de reflexió...
Questions
question
Chemistry, 12.12.2020 17:00
question
Social Studies, 12.12.2020 17:00
question
Medicine, 12.12.2020 17:00
question
Chemistry, 12.12.2020 17:00
question
Mathematics, 12.12.2020 17:00
question
Geography, 12.12.2020 17:00
Questions on the website: 13722367