Physics, 01.08.2021 18:50 jamesgotqui6

Could someone give me lessons for pressure?

Answers: 1

Show answers

Answers

Pressure is defined as the force acting per unit area surface.

Pressure = force/ area =F/A……1

S.I unit is Nm-2 isalso called 1Pascal (Pa). Pressure is scalar quantity.

Pressure is inversely proportional to the area. i.e. force acting on the small area exerts more pressure.

Pressure is directly proportional to the applied force.i.e. more pressure is exerted if the force is increased and vice-versa.

Liquid pressure:

The pressure exerted by the liquid in a vessel is called liquid pressure. Consider a liquid with density d in a beaker of cross sectional area A and height of liquid column is h.

P=F/A

P=m g/A

P=d Vg/A

P=d A hg /A

P=d h g……..1

The factors affecting the liquid pressure are:

Density of the liquid

Depth of liquid

Acceleration due to the gravity

Consequences of liquid pressure:

The pressure exerted by a liquid increases with depth.

A liquid finds its own level

The pressure at any point in a liquid acts in all direction.

Pascal’s Law: Pascal’s law of liquid pressure states that, “The pressure is equally exerted perpendicularly on all sides as pressure is applied on a liquid kept in a closed container.”

Instruments based on Pascal’s Law are: Hydraulic Brake and Pistons.

Up thrust: Up thrust is defined as the resultant thrust that a liquid uses to push up a body immersed in the liquid. Its SI unit is Newton.

Density: Density of the substance is defined as the mass per unit volume of that substance.

Density (d) = mass/volume

Density is measured in kg/m3 .in S.I system. And In c.g.s system it is measured in g/cm3.

Relative density: The ratio of the density of the substance to the density of the substance at 40C is called relative density of the substance. It is unit less.

Archimedes Principle:

It states that,” When a body is partially or wholly immersed in a liquid, it experiences an up thrust equal to the weight of the liquid displaced by it.” This principle is used to calculate up thrust or apparent weight of an object.

Let us consider a cylinder of height h and cross-sectional area A completely immersed in a liquid as shown in figure.

Top face be at height of h1 and bottom face be at height h2

Answer from: angiecamachoac1728

Explanation:

Pressure is defined as the physical force exerted on an object. The force applied is perpendicular to the surface of objects per unit area. The basic formula for pressure is F/A (Force per unit area). Unit of pressure is Pascals (Pa). Types of Pressures are Absolute, Atmospheric, Differential, and Gauge Pressure.

Answer from: Quest

0.11 m/s and 0.28 m/s should be correct

Answer from: Quest

get the total number of pieces of fruit and divide it by 4 to get the average. the result is the answer to the problem. 14 total number of fruits and there are 4 members. 14 divided by 4 is equals to 3.5.

Another question on Physics

Physics, 21.06.2019 19:40

Anne applies a force on a toy car and makes it move forward. what can be said about the forces acting on the toy car at the moment anne applies the force?

Answers: 1

Answer

Physics, 22.06.2019 10:30

Awoman holds a book by placing it between her hands such that she presses at right angles to the front and back covers. the book has a mass of m = 1.8 kg and the coefficient of static friction between her hand and the book is μs = 0.67. no attempt 50% part (a) what is the weight of the book, fgb in newtons?

Answers: 3

Answer

Physics, 22.06.2019 15:20

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2

Answers: 2

Answer

Physics, 22.06.2019 16:00

The electric field direction is defined by the direction of the force felt by (select one of the following answers): 1. a negative charge. 2. a positive charge. 3. both positive and negative charges.