26. A square loop whose sides are 6.0-cm long is made with copper wire of radius 1.0 mm. If a magnetic field perpendicular to the loop is changing at a rate of 5.0 mT/s, what is the current in the loop?

Explanation:

The formula for determining the Emf induced in a loop is:

where;

square area A = ( l²)

l² = 6.0 cm = 6.0 × 10⁻²

∴

Recall that:

The resistivity of copper = ohm m

We can as well say that the length of the copper wire = perimeter of the square loop;

The perimeter of the square loop = 4L

Thus, the length of the copper wire  = 4 (6.0 × 10⁻² )m

= 24× 10⁻² m

Finally, the current in the loop is determined from the formula:

V = IR

where,

V = voltage

I = current and R = resistance of the wire

Making "I" the subject:

I = V/R

where;

∴

I = 14.029 mA

as a general rule, scissors have blades less than 6 in (15 cm) long and usually have handles with finger holes of the same size. shears have blades scissors used to cut hair or fabric must be much sharper

the small 0.38-kg slider is known to move from position a to position b along the vertical-plane slot. determine (a) the work done on the body by its weight and (b) the work done on the body by the spring. the distance r = 0.70 m, the spring modulus k = 154 n/m, and the unstretched length of the spring is 0.53 m

explanation:

-reverse card