b) Determine the minimum crack size that can be tolerated in a sheet of high-tensile yield stress of 1200 MPa and a toughness 30 kJ/m2. If the design stress safety factor is 1.5. Assume that E for the material is 210 GPA.

Two thin 80.0- cm rods are oriented at right angles to each other. each rod has one end at the origin of the coordinates, and one of them extends along the x- axis while the other extends along the yaxis. the rod along the x- axis carries a charge of - 15.0 μ c distributed uniformly along its length, and the other rod carries 15.0 μ c uniformly over its length. find the magnitude and direction of the net electrical force that these two rods exert on an electron located at the point (40.0 cm, 40.0 cm). (e

To run the physics cart, the fan speed of the cart is manipulated. this is the (blank) variable. the cart accelerates due to the speed of the fan. acceleration is therefore the (blank) variable. a “constant” is a parameter that stays the same regardless of the variables. one parameter of the cart that is held constant is the (blank) .

Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?