New lab e # testportal. net/exam/DoTestQuestion. html
Testname: Physics - Par exam z mensive group
Time Tent to complete the rest un to min. To Sec
Question 12/21 (4 p.)
10 grams of aluminium heated from -20°C to 800*C. The specific heat of aluminium is 900 J/kg °C (for solid and liquid aluminium as well),
the heat of solidification is 400 kJ/kg, and the melting point is 660 °C.
Calculate
a. The energy required to heat the aluminium to its melting point
b. The energy required to melt the whole amount
c. The energy that the entire process requires
In the space below write only the answers you calculated (only the values + unit)

Paragraph
DD (1)
BI X2 x 2
X x 2 ©
A
a
P
Answer auto-saved at: 9:56:27 AM
1 WORDS POWERED BY TINY
Type here to search
gi
E
27°C
* !
9:57 am
12/07/2021

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28