In millikan type appratus, the horizontal plate are 1.5 cm apart. with the electric field switched off an oil drop is observed to fall with the steady velocity 2.5×10^-2 cm/s . When the electric field is switched on the upper plate being positive, the drop just remains stationary when the p. d between plates is 1500v. Calculate the radius of the drop and how many electronic changes does it carry?

Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?

Water is siphoned from a large tank and discharges into the atmosphere through a 50-mm diameter tube. the end of the tube is b = 2.6 m below the tank bottom which is a = 6.7 m deep, and viscous effects are negligible. determine the maximum height h over which the water can be siphoned without cavitation occurring. atmospheric pressure is 101.4 kpa, and the water vapor pressure is 1.79 kpa (absolute). report your answer in meters to two decimal places.

Dc versus ac problem. suppose your dc power supply is set to 15 v and the vertical setting on the oscilloscope is at 5 v/div. how many divisions will the trace deflect if you connect the output of the power supply to the scope with the a input switch set on dc? how many divisions if the switch is on ac?