Two blocks, 1 and 2, are connected by a rope R1 of negligible mass. A second rope R2, also of negligible mass, is tied to block 2. A force is applied to R2 and the blocks accelerate forward. Find the ratio of the forces exerted on blocks 1 and 2 by the ropes R1 and R2 respectively. Here m1

The “death throes” of stars are amongst the most complex phenomena in all of astronomy, and the “corpses” of stars amongst the most energetic and exotic objects in existence. beginning at the end of the core helium fusion stage in a star’s life, describe in detail the post-main sequence development of both (a) a 1.0 solar mass star, and (b) a 25.0 solar mass star. in what significant ways do they differ? what role does each of these types of stars play in the "star-gas-star" cycle and the evolution of chemical elements in our galaxy?

Water at room temperature of 20.0°c is poured into an aluminum cylinder which has graduation markings etched on the inside. the reading in the graduations is 300.0 cc. the cylinder with the water in it is then immersed in a constant temperature bath at a temperature of 100°c. what is the reading for the level of water on the graduations of the cylinder after the water and the cylinder reach thermal equilibrium with the bath? the volume coefficient of expansion of water is 2.07 x 10^-4 k-1, and the linear coefficient of expansion of aluminum is 23.0 x 10^-6 k-1. a) 305.0 cc b) 304.0 cc c) 303.5 cc d) 303.3 cc e) 304.5 cc

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?