Determine the coefficient of friction of a 3.0-kg block that is being pulled across a table at a constant velocity with a force of 10.3 N.
(1) 0.35 (3) 0.48
(2) 0.17 (4) 0.52
5. What is the coefficient of friction of the block in problem #4 if the block is
accelerated at a rate of 2.0 m/s 2 with a force of 20.0 N?
(1) 0.48 (3) 0.12
(2) 0.59 (4) 0.85

You need to be more specific.  i really don't know what a "motion map" is.you can draw a graph of an object's position, distance, displacement, speed,velocity, or acceleration versus time, or you can draw a graph of the object's x-position versus its y-position and not give any information about time at all.if the graph presents position or displacement against time,  then constant velocity is a straight line . . i.e. a line that has  constant slope.if the graph shows speed against time, then constant velocityis a horizontal piece of line.if the graph shows acceleration against time, then constant  velocity is a piece of line that lies on the x-axis . . it's value is zero. 

If the heat engine is a perfect carnot cycle engine, thenefficiency = (t2-t1)/t2   where t1=temperature of cold reservoir ( ° k) = 135            t2=temperature of hot reservoir ( ° k)   = 325thereforeefficiency = (t2-t1)/t2 = (325-135)/325 = 0.5846 = 58%  note: this is the theoretical maximum efficiency of a perfect heat engine.   real-life engines do not achieve this value.

Ke reqd to move from 0 to 50 will be proportional to 50x50 or 2500. this is equal to w.  to change vel from 50 to 150 you need energy prop to 22500 - 2500 = 20,000. this corresponds to 8w.  best answer is a) . work reqd is prop to velocity squared.