![m_{i} \cdot [c_{i}\cdot (T_{1}-T_{2}) - L_{f} + c_{w}\cdot (T_{2}-T_{3})] + m_{w} \cdot c_{w}\cdot (T_{4}-T_{3}) = 0](/tpl/images/1348/5993/4cb16.png)
(1)
- Mass of ice, in grams.
- Mass of the juice, in grams. 
- Specific heat of ice, in joules per gram-degree Celsius.
- Specific heat of water, in joules per gram-degree Celsius.
- Latent heat of fusion, in joules per gram. 
- Initial temperature of ice, in degrees Celsius.
- Melting point of water, in degrees Celsius. 
- Final temperature of the ice-juice system, in degrees Celsius. 
- Initial temperature of the juice, in degrees Celsius. 
, 
, 
, 
, 
, 
, 
and 
, then the mass of the juice is:![m_{w} = \frac{m_{i}\cdot [c_{i}\cdot (T_{1}-T_{2}) - L_{f} + c_{w}\cdot (T_{2}-T_{3})]}{c_{w} \cdot (T_{3}-T_{4})}](/tpl/images/1348/5993/375ff.png)
![m_{w} = \frac{(100\,g)\cdot \left[\left(2.090\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (-10\,^{\circ}C) - 334\,\frac{J}{g} +\left(4.18\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (-10\,^{\circ}C) \right]}{\left(4.180\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (-10\,^{\circ}C)}](/tpl/images/1348/5993/15d34.png)
100 g of Ice at -10°C is added into a
liquid juice at 20°c . The temperature of Juice
dropped...
Physics, 26.05.2021 09:40 melanysanson11
100 g of Ice at -10°C is added into a
liquid juice at 20°c . The temperature of Juice
dropped to l0°c after all the Ice has melted.
Calculate the mass of the Juice responsible
for metting an Ice
Answers: 2
Another question on Physics
Physics, 22.06.2019 03:10
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.
Answers: 2
Physics, 22.06.2019 06:00
Explain earth's motion, using the terms "precession" and "rotation" in your answer.
Answers: 1
Physics, 22.06.2019 10:00
Awater-filled u-tube manometer is used to measure the pressure inside a tank that contains air. the water level in the u-tube on the side that connects to the tank is 5 ft above the base of the tank. the water level in the other side of the u-tube (which is open to the atmosphere) is 2 ft above the base. determine the pressure within the tank.
Answers: 2
Physics, 22.06.2019 14:30
When the displacement of a mass on a spring is 12a the half of the amplitude, what fraction of the mechanical energy is kinetic energy? at what displacement, as a fraction of a, is the mechanical energy half kinetic and half potential?
Answers: 3
You know the right answer?
Questions
History, 28.03.2020 06:56
Chemistry, 28.03.2020 06:57
Mathematics, 28.03.2020 06:57
History, 28.03.2020 06:57
Geography, 28.03.2020 06:58
Mathematics, 28.03.2020 06:58
History, 28.03.2020 06:58
Mathematics, 28.03.2020 06:58
Mathematics, 28.03.2020 06:59
English, 28.03.2020 06:59
Mathematics, 28.03.2020 07:00
Mathematics, 28.03.2020 07:00
French, 28.03.2020 07:00
