If you were able to make a 3 dimensional model of magnetic force, using a magnet and magnetic field lines, which 2 characteristics might your model have? a) The arrows on the field lines would point from the magnet's south pole to its north pole. b) The field lines would cross paths between one pole of the magnet and the other pole. c) the field lines would exist all around the magnet. d) the field lines near the magnet would be close together.

Standing side by side ,you and a friend step off a bridge at different times and fall for 1.6s to the water below.your friend goes first,and you follow after he has dropped a distance of 2.0m.when your friend hits the water,is the seperation between the two of you 2.0m or more than 2.0m? verify your answer with a calculation.

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Which inventor was often called the lady edison