subject

Physics, 14.05.2021 19:30 gustavoroggero39

A 10- kilogram box is at static equilibrium and the downward pull of gravity acting on the box is 98 Newton's what is the minimum force that would be required to just pick up the box ?

ansver

Answers: 1

Show answers

Another question on Physics

question

Physics, 21.06.2019 19:00

An object is located 30.0 cm from a concave mirror. the focal length is 15.0 c,. what is the image distance? a. 30.0 cm b. -10 cm c. 10.0 cm d. -30.0 cm

Answers: 1

question

Physics, 22.06.2019 01:20

Abanked road comer of radius 146 m is to be constructed. if the comer is designed for vehicles moving with a speed of 20.0 m/s, what should the banking angle be, in units of degrees?

Answers: 3

question

Physics, 22.06.2019 06:00

Using a pedometer, you walk 3000 steps in 20 minutes, so your speed is 150 steps/min. each of your steps is 0.7 m long. what is your speed? 150 steps/min=/s=/h

Answers: 1

question

Physics, 22.06.2019 10:30

The uniform slender bar rests on a smooth horizon- tal surface when a force f is applied normal to the bar at point a. point a is observed to have an initial acceleration aa of 20 m/s2, and the bar has a corre- sponding angular acceleration of 18 rad /s2. deter- mine the distance b.

Answers: 1

You know the right answer?

A 10- kilogram box is at static equilibrium and the downward pull of gravity acting on the box is 98...

Questions

question

Biology, 14.09.2019 01:30

Treatment levels that produce circulating levels in excess of natural or optimal levels are termed...

question

Biology, 14.09.2019 01:30

Tropism describes a virusâ€™s affinity for specific tissues: a) true b) false...

question

Mathematics, 14.09.2019 01:30

The tallest living man at one time had a height of 230 cm. the shortest living man at that time had a height of 91.3 cm. heights of men at that time h...

question

Mathematics, 14.09.2019 01:30

An equation one solution. alwa sometimes never...

question

English, 14.09.2019 01:30

Select the correct answer. which of the following is a defining characteristic of an ethical appeal?...

question

Engineering, 14.09.2019 01:30

By = 4.8 kn ay = 6,.0 kn there is the wrong perpendicular distance in the summation ofmoments about a formula for by....

question

Engineering, 14.09.2019 01:30

W= 600 draw the fbd and determine the reactions at the support(s)....

question

Engineering, 14.09.2019 01:30

The magnitude of the concentrated load is equal to the total load or the area under the curve. f = 18.0 kn the line of action of the concentrated load...

question

Engineering, 14.09.2019 01:30

Determine all the forces axerted on member ai when a clockwisecouple of magnitude 180 ft. lb is applied to the frame (a) at pointd, (b) at...

question

Engineering, 14.09.2019 01:30

At the instant shown, rod a b lias an angular velocity omegaab = 3 rad/s and an angular acceleration alphaab = 5 rad/s2. determine the angular velocit...

question

Engineering, 14.09.2019 01:30

At the instant shown, the velocity of collar a is 0.4m/s to the right and the velocity of collar b is 1m/s to the left. determine (a) the angular velo...

question

Engineering, 14.09.2019 02:10

The condition of irrotationality for a two-dimensional flow is satisfied when rotation w everywhere is (less than — equal to — more than) zero....

question

Engineering, 14.09.2019 02:10

The flow of a real fluid has (more —less - same ) complexity of an ideal fluid, owing to the phenomena caused by the existence of (viscosity-pressure...

question

Engineering, 14.09.2019 02:10

In laminar now, fluid particles are constrained to motion in (parallel —perpendicular opposite) paths by the action of (temperature- viscosity —pressu...

question

Engineering, 14.09.2019 02:10

Which of the following is not a function of a plc programming device? a. to enter the user program b. to monitor the user program c. to execute the u...

question

Engineering, 14.09.2019 02:10

Acertain measurement is performed 50 times. the arithmetic mean reading is 7.163 ft., and the standard deviation is 0.01 ft. how many readings fall wi...

question

Engineering, 14.09.2019 02:10

Apolyimide photoresist requires 90 mj/cm^2 per micron of thickness to be developed properly. if a lamp provides 900 w/m, how long does it take to expo...

question

Engineering, 14.09.2019 02:10

Determine ixx for the cylinder with a concentarted circular hole. the mass of body is m...

question

Engineering, 14.09.2019 02:10

Two 14.5° pressure angle, mating, 5-pitch gears have 30 and 110 teeth. in practice, the gears are mounted at a center distance 0.7 inches greater than...

question

Engineering, 14.09.2019 02:10

The center distance of two spur gears that have 20° pressure angle and full-depth with diametral pitch of 8 teeth/in, is increased by 0.05 in over the...

More questions: Physics Another questions

Questions on the website: 13722363