The scientific method involves several steps. According to the concept, what is the most common order to conduct those
steps when applying science to solve a problem?
a
1) identify the problem 2) gather data 3) make a
hypothesis 4) review results 5) test the hypothesis
b
1) identify the problem 2) gather data 3) make a
hypothesis 4) test the hypothesis 5) review results
С
1) gather data 2) identify the problem 3) make a
hypothesis 4) test the hypothesis 5) review results
d
1) identify the problem 2) make a hypothesis 3)
gather data 4) test the hypothesis 5) review results

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the journeys of marquette, joliet and la salle a) new france expand.

all three of these explorers explored the midwest and the area around the great lakes, which they subsequently claimed for france.

this was a big portion of territory and expanded new france which before then only consisted of quebec province in northeastern canada