Physics, 27.04.2021 14:40 cookiemonster0476

A wheel rotates about a fixed axis with an initial angular velocity of 20 rad/s. During a 5.0-s interval the angular velocity increases to 40 rad/s. Assume that the angular acceleration was constant during the 5.0-s interval. How many revolutions does the wheel turn through during the 5.0-s interval ( in revelations)? Hint: You need to use one of the equations of constant angular acceleration that independent of angular acceleration.

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 19:30

11. you want to calculate the displacement of an object thrown over a bridge. using -10 m/s2 for acceleration due to gravity, what would be the total displacement of the object if it took 8 seconds before hitting the water?

Answers: 1

Answer

Physics, 22.06.2019 12:30

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.

Answers: 1

Answer

Physics, 22.06.2019 15:30

Ametal ring 4.20 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. these magnets produce an initial uniform field of 1.12 t between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.240 t/s . (a) what is the magnitude of the electric field induced in the ring? (b) in which direction (clockwise or counterclockwise) does the current flow as viewed by someone on the south pole of the magnet?

Answers: 2

Answer

Physics, 22.06.2019 20:00

Choose a realistic problem for which these are the correct freebody diagrams. be sure that the answer that the problem requests is consistent with the diagrams shown. choose a realistic problem for which these are the correct freebody diagrams. be sure that the answer that the problem requests is consistent with the diagrams shown. a 1.0 kg block is placed on top of a 2.0 kg block. a horizontal rope pulls the 2.0 kg block across a frictionless floor with a force of 21.0 n. the coefficient between the two blocks is 0.75. does the 1.0 kg block on top slide?

Answers: 3

Answer

You know the right answer?

A wheel rotates about a fixed axis with an initial angular velocity of 20 rad/s. During a 5.0-s inte...

Questions