Underground water is being pumped into a pool whose cross section is 3 m x 4 m while water is discharged through a 0.076m-diameter orifice at a constant average velocity of 6.3 m/s. if the water level in the pool rises at a rate of 1.5 cm/min, determine the rate at which water is supplied to the pool, in m3/s.

Given:

Area of pool = 3m×4m
Diameter of orifice = 0.076m
Outlet Velocity = 6.3m/s
Accumulation velocity = 1.5cm/min

Required:

Inlet flowrate

Solution:

The problem can be solved by this general formula.

Accumulation = Inlet flowrate - Outlet flowrate
Accumulation velocity × Area of pool = Inlet flowrate - Outlet velocity × Area of orifice

First, we need to convert the units of the accumulation velocity into m/s to be consistent.

Accumulation velocity = 1.5cm/min × (1min/60s)×(1m/100cm)
Accumulation velocity = 0.00025 m/s

We then calculate the area of the pool and the area of the orifice by:

Area of pool = 3 × 4 m²
Area of pool = 12m²

Area of orifice = πd²/4 = π(0.076m)²/4
Area of orifice = 0.00454m²

Since we have all we need, we plug in the values to the general equation earlier

Accumulation velocity × Area of pool = Inlet flowrate - Outlet velocity × Area of orifice

0.00025 m/s × 12m² = Inlet flowrate - 6.3m/s × 0.00454m²

Transposing terms,

Inlet flowrate = 0.316 m³/s

Well the magnitude of its acceleration related to that car starts with the oil change like when you have to change the oil in your car you have to make sure that your precious car is starting really propley and very well